0%

Phone:

+389 (0)2 2403-100

E-mail:

sales@fibernet.mk

Blog

New Opportunities With Power Over Ethernet

Quad-pair PoE, a power supply that uses all four twisted pairs of LAN cables, will soon be able to supply connected devices with power in excess of a minimum of 50W and even up to 100W. The IEEE 4PpoE standard is currently in progress.

The latest version is expected in 2017. Unlike several previous standards, which are useless due to lack of real-life applications, the demand for 4PPoE has been active for some time. PoE (IEEE 802.3af-2003) and PoE+ (IEEE 802.3at-2009), which supply end-to-end equipment with around 13W or 25W, already have an excellent track record. With 4PPoE (IEEE 802.3bt) power supply for applications where PoE+ is not sufficient now becomes possible:

 

– Docking stations for laptops, NAS devices and smaller switches, such as for video conferencing, require between 30W and 100W
– Thin clients for remote desktop environments, such as terminals in libraries or warehouses, require from 50W to 100W
– Small drives, drive controls, sensors and IP cameras often require more than 30W

 

The power supply, which is directly switched on through local network cables, can facilitate the management of professional facilities such as controlling lighting, monitoring and access, as well as facilitate smart equipment for private homes. Last but not least, the simplified technology is made to reach a secure position in industrial environments, helping Industry 4.0, Internet of Things and Smart Home to find a place in real life.

 

In The Spotlight: Wireless Access Points
One of the driving forces behind 4PpoE is IEEE 802.11ac, the latest Wireless Access Points standard in the 5GHz band, which is implemented in two phases or "waves". Wave 1 offers a variable wider range of up to 80MHz for radio channels, and Wave 2 up to 160MHz. The important point to remember in corporate applications is that wave 2 extends MIMO technology to MU-MIMO (multiple MIMO users) – one Access Point can serve multiple clients at the same time. This technology prevents slow "users" from using the entire capacity and therefore significantly increases the efficiency of the entire system. 

Greater efficiency also means higher transmission rates on LAN cables. The new Access Points can theoretically send up to eight separate, spatial and complete data streams over the air at up to 6.9Gbit/s. In practice, the number usually stays at 2.3 to 3.5 Gbit/s with three to four streams. A line-side Gigabit Ethernet connection is not sufficient. Therefore, the interim rates of 2.5 Gigabit Ethernet and 5 Gigabit Ethernet are under discussion, in order to allow the continued use of existing cable installations that are not compatible with 10

gigabit ethernet. However, the next rate of development will make them obsolete, as the IEEE is considering another quadrupling of the transmission rate with 802.11ax. With their larger capacities, the new IEEE 802.11ac Access Points also require more power. While they were previously satisfied with a typical power of 16W, now they need about 35-40W, which requires 4PpoE.

Standard Definition 2017 – time to make a decision?
The latest version of the 4PPoE standard hasn't been released yet, but it's not just the second wave of Access Points that should be released – other applications will be released as well. Two different groups of companies developed the interim 2.5 and 5 gigabit solutions in 2014, and each hopes their technology will be standardized by IEEE's new P802.3bz working group.



Meanwhile, the commercial solutions, for the so-called "odd" transmission rates and higher current through LAN cables are available on the market. Solutions that are considered to be according to standards may later be commercial solutions. Therefore, R&M advises not to make hasty decisions. New installations should be planned for the future and equipped with high-quality products, in order to prevent restrictions or unwanted surprises during the implementation of additional line determination. When dealing with cables, where purely physical regulations apply, the story is very clear. The suitability of existing cable solutions for a specific transmission rate depends not only on the classes – D, E, EA – but also on the length to be connected. The permissible level of PoE current in the cables is determined by the cross-section and installation situation of the cables. These factors must be taken into account in the planning stages and when selecting components in order to create cabling solutions for the future. To determine the compatibility of existing cables with 4PPoE or to define the requirements for new installations, R&M offers a PoE calculator that takes into account all relevant parameters, such as cable types, package thickness and outside air temperature.

en_GB